Skip to content
Free Freight In Australia On PARTS Orders $55+ (Exclusions Apply)
Free Freight On PARTS Orders $55+ (Exlusions Apply)
RED 12MM HEATSHRINK 1M LENGTH

RED 12MM HEATSHRINK 1M LENGTH

SKU: SUR/HSDWA120RD

$10.03 - $10.03
$10.03
$10.03 - $10.03
$10.03
In Stock

Click & Collect Available

Order online and collect within 2 hours during business hours.

Heavy-Duty Dual Wall Heat Shrink Tubing | 12mm Diameter, 3:1 Ratio (Red - 1m Length)

Protect, insulate, and fully waterproof your heavy-gauge electrical joins with this premium 12mm Red Dual Wall Heat Shrink Tubing. Supplied in a convenient 1-metre length, this commercial-grade polyolefin tubing features an advanced 3:1 shrink ratio, meaning it collapses down to a tight 4mm diameter to provide a seamless, form-fitting protective barrier over large cable lugs, splices, and battery terminals.

Engineered with an internal hot-melt adhesive lining, the outer wall shrinks tightly under heat while the inner layer melts and flows. This encapsulates the entire joint, creating a permanent, watertight, and dustproof environment seal that completely blocks out moisture, salt, and atmospheric corrosion.

Key Features

  • Advanced 3:1 Shrink Ratio: Highly versatile sizing that easily slides over bulky terminals or lugs and shrinks down small enough to grip the bare cable tightly.

  • Dual Wall Co-Extrusion: Built with a flame-retardant outer layer for ultimate physical toughness and a hot-melt adhesive inner liner for a flawless, watertight seal.

  • Superior Strain Relief: Vastly improves the mechanical strength of the cable transition, absorbing vibrations and physical pulling forces to prevent structural failures.

  • Flame and Chemical Resistant: Manufactured to withstand extreme engine bay environments, resisting fuels, hydraulic oils, acids, and environmental solvents.

  • Industrial Compliance: Crafted to comply with RoHS, REACH, and ISO manufacturing standards, making it the choice for professional trade installations.

Technical Specifications

Feature Specification
Product Type Dual Wall Adhesive-Lined Heat Shrink
Color Red (Ideal for positive DC power lines)
Supplied Diameter 12mm
Fully Shrunk Diameter 4mm
Shrink Ratio 3:1 (Longitudinal Change: ≤ ±8%)
Supplied Length 1 Metre
Material Profile Premium Polyolefin + Hot-Melt Adhesive Layer
Operating Temperature -45°C to +125°C
Shrink Temperature Starts at 125°C (Fully recovered up to 200°C)
Voltage Rating 600V Continuous

Applications

The ultimate solution for professional insulation and weatherproofing on medium-to-large wiring setups, including:

  • Sealing 25mm² and 35mm² battery cable lugs and eyelet terminations

  • Insulation for 12V / 24V / 48V positive DC power distribution bars and dual battery setups

  • Marine electrical overhauls, bilge pump links, and boat trailer harness protection

  • 4WD accessory circuits, under-bonnet relay wiring, and winch power connections

  • Commercial switchgear, solar arrays, and outdoor industrial junction points